#1 __________ command is used delete the directory and subdirectory.
#2 SCSI stands for __________
Small Computer System Interface
Serial Computer System Interface
Small Company System Interface
#3 The -12v output from the SMPS is used for __________
convert ac to dc
convert dc ato ac
#4 Centronics connector is used by _________
#5 DRAM is available as ________ modules.
#6 Motherboard can be broadly classified as _______ & _________
Intel and VIA
Corel and Intel
Intel and IBM
Intel and AMD
#7 __________, _________ connector is used to connect the keyboard to the motherboard.
Serial and USB
Normal and USB
Cable and USB
#8 We can create partitions in a HDD using _________
IDE and SATA Port
Normal and IDE
FDD and CDD
CDD and SCSI
#9 Clusters are _______
to connect data
disk of galaxy
both a and c
#10 Modem is available as __________, _______
Both a and b
Modulation and Demodulation
#11 Dist Manager Program can be used to perform ________
#12 _________ & _________ sizes of Floppy disks are available.
1.2 MB, 1.44 MB
1.44 MB, 1.88 MB
1.3 MB, 2.77 MB
1.55 MB, 1.4 MB
#13 LOT Stands for _____________
Line of Travel
Look of Table
Large of Table
Large of Travel
#14 The default serial port is ___________
#15 DIN Stands for ___________
Deutsches Institute for Normung
Data Information for Normal
Device Information for Network
#16 _________, ___________ keys using CMOS setup.
F12 and F3
F10 and F2
F13 and F1
F11 and F2
#17 Dos operating system supported only ________ file system.
#18 _________ Command is using FAT volume into NTFS Volume.
#19 SATA stands for __________
Serial Advance Term Available
Source Advanced Term Application
Source Advanced Term Attachment
Serial Advanced Technology Attachment
#20 _________ pin power connector using ATX power supply.